What to Know About Snow Melt and Deicing Systems

September 2024 · 3 minute read

There are plenty of residential snow and ice melt products. You can spread rock salt or liquid ice melts, but some have negative effects on your home and the environment, and you’ll need to keep them in stock all winter long. If you’re unsatisfied with traditional ice melt methods, a deicing system might be the answer you’re looking for.

Snow Melt and Deicing System Options

There are two types of residential deicing systems: radiant heat systems and removable floor mats. Both have gained popularity in recent years.

Heated driveways and heated floors use radiant heat systems. Radiant heat systems are electric or hydronic, meaning they use electricity or water to provide heat. Electric systems may use cables, similar to roof deicing cables, or mats to run electric heat beneath your driveway, while hydronic systems use PEX and a boiler. Both styles are installed under the surface you want to heat, creating a permanent solution that doesn’t detract from your landscaping.

Although more expensive than a snow shovel, heated floor mats like the HeatTrak Heated Snow Melting Walkway Mat is an affordable deicing option. These are basically rugs that plug into an outdoor outlet. HeatTrak’s mats can be left outside all winter. When turned on, they stay 40 degrees warmer than the outside temperature and melt two inches of snow per hour. Leave them on until the meltwater evaporates to prevent refreezing of wet mats.

Pros and Cons of Each Snow Melting System

Radiant heat deicing systems and snow melting mats serve the same purpose, but they are different products. Knowing the pros and cons will help you decide which is right for you.

Radiant Heat System Pros

Radiant Heat System Cons

Floor Mat Pros

Floor Mat Cons

Deicing System Installation Process

If you decide to get a radiant heat system, it’s easiest to install while you’re already replacing a driveway or sidewalk. HomeAdvisor says that in some situations tubing may be run beneath an existing driveway, but the system’s warranty might be nullified. Typically, electric cables or PEX must be placed in a new driveway before the surface is poured. With a hydronic system, you’ll also need to install a boiler if you don’t have one already.

Snow melting mats barely have an installation process at all. Simply take them out of the box, roll them out and plug them into an outdoor outlet. Your mats can stay plugged in, but you should turn them off when not in use. To make things easier for yourself, you could wire the outlet to a switch.

ncG1vNJzZmivp6x7p63MoqOyoJGjsbq5wKdlnKedZK6zwMico55np52utXnTqGSkpp%2BseqKuzq6rZpyVnrCqusZmqrKrpJq6tHs%3D